Bobcat Skid and Track Loader Manifold Coupler Old Style FEMALE PN 6680018

FEMALE Manifold coupler is a direct replacement cartridge for Older Bobcat Skid Steer and Track loaders as well as other machinery fitted with the “OLD STYLE” 4BD4FI Manifold mounted to the inside left of the boom of the machine.

Designed to screw into the Old Style manifold mounted to the inside left arm or boom that lifts and supports the bucket or other optional implements.

Also Fits Takeuchi Track Loaders

 Save your back and prevent blisters get yourself a set of spares because if you knock and damage one of these then you and your machine are out of action (unless you like to using a spade or shovel)

These manifold couplers are used to quickly and easily connect (without oil leaks) to the auxiliary hydraulic circuit to power and operate attachments such as 4 in 1 buckets, Trenchers, Augers or Post Hole diggers, Grapples, Rock Breakers, Brooms and Sweepers.   

Fully interchangeable and connectable with all other flat face couplers manufactured to ISO 16028 Specifications

If you have a Bobcat or Takeuchi Skid Steer Loader, Track Loader, Compact loader or Excavator, then chances are your machine is fitted with these couplers and someday they will require replacement.

Specifications.

Bobcat Part Number 6680018

Faster, Part Number 4FFI-12

Description “Kit Coupler”

Please note this coupler cartridge is for the “OLD STYLE” 4BD4FI Manifold

These couplers have an external Metric Thread measuring Ø46mm with a 1.5 mm pitch (approx. Ø 1-13/16” with 17 T.P.I )

The male end has a diameter of 24.5 mm

It is also identified by its Three (3) Sets of external Black O Rings with 3 White Backing Rings.

Please note These are NOT the new Style coupler. That have an external Metric Thread measuring Ø 48mm with a 1.5 mm pitch (approx. Ø 1-7/8” with 17 T.P.I ) and only two (2) O Rings (one Black and one Blue) and No White Backing rings.

Maximum Working Pressure 350 Bar (5145 PSI)

Nominal Size, Dash 08, 12.5 mm, ½”

Rated Flow Rate up to 110 Lt / Min (27.5 Gallons / Min)

Virtually Dry Break on Disconnect (less than 0.01ml)

Connect under pressure? Yes

Force required to connect 210 N (21 KG) (47 pounds)

Minimum Burst pressure 1400 Bar (20500 PSI)

Operating temperature -40 Degrees Celsius to +105 Degrees Celsius

The female coupler has a lockable collar to prevent accidental disconnection

Machine Compatibility

Bobcat Skid Steer Models

753, 763, 773

863, 864, 883

A220.

A300.

A770.

S130, S150, S160, S175, S185.

S205, S220, S250.

S300, S330.

S450.

S510, S530, S550, S570, S590.

S630, S650.

S750, S770.

S850.

Bobcat Track Drive Models

T140, T180, T190.

T200, T250.

T300, T320.

T450.

T550, T590.

T630, T650.

T750, T770.

T870.

Bobcat Telescopic Loader, Reach Truck Models

TL360, TL470, TL470HF.

Bobcat Tool Cat Models

5600, 5610.

These 1/2" flat face coupler are compatible with;

DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , Hansen QA, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49